● Units available now

Order PathFinder

Handbuilt in small batches in the Netherlands. Choose the model that fits your setup and get in touch to place your order.

How to order

Ordering is simple — no webshop, just direct contact.

1

Choose your model

Pick the PathFinder variant that fits your antenna setup below.

2

Send an e-mail

Use the Order button to open a pre-filled e-mail with your chosen model.

3

Confirm & pay

We confirm availability and send a bank transfer invoice (SEPA/iDEAL).

4

Ship within EU

Shipped via PostNL tracked parcel within 3–5 business days after payment.

Stock notice: Units are produced in small batches. If your preferred model is out of stock we will place you on the waiting list and ship as soon as the next batch is ready (typically 2–4 weeks).

Available models

The Dual is available with or without the 6-pin cable. All models use the same firmware and are fully compatible with all supported software.

Available

PathFinder Dual

With 6-pin cable

Compact USB interface in 3D-printed enclosure. Controls azimuth and elevation simultaneously via two independent Mini-DIN-6 connectors.

AZ + EL USB powered Mini-DIN-6 × 2 3D-printed enclosure GS232A/B
€85 excl. shipping 🇪🇺 EU only
  • ✓ PathFinder Dual unit (assembled & tested)
  • ✓ USB-B cable
  • ✓ Mini-DIN-6 cable (1.5 m)
  • ✓ Quick-start card
  • – Power adapter (USB powered — not needed)
View full specifications →
🛒 Order Dual with cable — €85 View specs & photos →
Available

PathFinder Dual

Without 6-pin cable Recommended for G-5xx users

Compact USB interface in 3D-printed enclosure. Controls azimuth and elevation simultaneously via two independent Mini-DIN-6 connectors.

AZ + EL USB powered Mini-DIN-6 × 2 3D-printed enclosure GS232A/B
€80 excl. shipping 🇪🇺 EU only
  • ✓ PathFinder Dual unit (assembled & tested)
  • ✓ USB-B cable
  • – Mini-DIN-6 cable (not included)
  • ✓ Quick-start card
  • – Power adapter (USB powered — not needed)
View full specifications →
🛒 Order Dual without cable — €80 View specs & photos →
Available

PathFinder SDX

Built-in controller board for SDX rotator systems. Replaces the standard SDX controller — no external interface box required.

AZ + EL SDX built-in GS232A/B Direct mount
€70 excl. shipping 🇪🇺 EU only
  • ✓ PathFinder SDX board (assembled & tested)
  • ✓ USB-B cable
  • ✓ Mounting hardware
  • ✓ Quick-start card
  • – Enclosure (board mounts inside SDX housing)
View full specifications →
🛒 Order PathFinder SDX — €70 View specs & photos →

Model comparison

Not sure which model to pick? Use this table to compare the two options side-by-side.

Feature PathFinder Dual PathFinder SDX
Price€85 with 6-pin cable
€80 without cable		€70 excl. shipping
Enclosure3D-printed standalone boxMounts inside SDX housing
Azimuth control✓✓
Elevation control✓✓
USB powered (no adapter)✓✓
FTDI auto-detected✓✓
GS232A / GS232B✓✓
Connector typeMini-DIN-6 × 2SDX direct header
Best forAny rotator with Mini-DIN-6SDX rotator systems
USB cable included✓✓
Mini-DIN cable included✓ / — (choose version)—

Frequently asked questions

Currently shipping within the EU only (Netherlands, Germany, Belgium, France, etc.). We hope to expand to the UK and other countries in the future. Contact us if you're outside the EU — we may be able to make arrangements for special cases.
Orders are shipped within 3–5 business days after payment confirmation. Delivery within the Netherlands is typically 1 business day; EU destinations usually 2–5 business days via PostNL tracked parcel.
We invoice via bank transfer (SEPA). Dutch customers can also pay via iDEAL. Payment must be received before shipment. Invoices are valid for 14 days.
Yes. Please mention the quantity in your order e-mail. For orders of 3 or more units, contact us — we may be able to offer a small discount depending on available stock.
Yes — all units carry a 12-month warranty covering manufacturing defects. Damage caused by incorrect wiring or overvoltage is not covered. Contact us via e-mail if you experience any issues and we'll sort it out.
PathFinder is designed for radio amateurs who are comfortable wiring rotator cables. The Full Guide covers everything step by step, including connector wiring, calibration, and software setup. The Windows app is an easy installer — no command line needed.

Ready to order?

Click the button to send a pre-filled order e-mail. We'll confirm availability and send you an invoice within 1 business day.

✉ Contact & Order